Inspection and Quality Assurance

Libyan Iron and Steel Company (LISCO), Misurata, Libya

• Inspection services of equipment for 1.26 million tons steel plant of Misurata Steel Complex, Misurata, Libya.
• Inspection services provided for the various equipment in Europe for the expansion of DR module III of LISCO.
• Inspection services for various equipment of SMS-1 capacity augmentation project.

Qatar Steel Company (QASCO), Qatar

• Third party inspection services for refractory bricks at National Refractories at Asansol, West Bengal.
• Inspection services at manufacturers works of Vasavakit Patana Corporation Ltd (VIPCO), Bangkok for QASCO expansion project.
• Expediting work at manufacturer’s works for new bar mill of QASCO
• Inspection services of process gas compressor at manufacturer’s works in roots dresser, USA for EPC-DRI contract of QASCO upgradation project.

Sacha Exporters & Investors Private Ltd, Bangkok, Thailand

• Inspection of plant, machinery and structural of Indian manufacture for Thai-India steel mill project in Bangkok.

CVG Siderurgica del Orinoco CA, Venezuela

• Inspection of equipment for Sidor Plan IV rolling mill expansion project
• Inspection and quality assurance services for ladle furnace, cranes, dedusting system, alloy handling system, compressor, electrical equipment, etc for SIDOR plant, Matanzas, ladle furnace project.
• Inspection services for 4 dual stage (process/ ooling) gas compressors at the manufacturer’s premises of ROOTS DRESER, USA, where PSI, USA was the main contractor.
• Inspection services for 4 nos. gear reducers and lubrication system at the manufacturer’s premises of Flender AG, Germany.
• Inspection services for inert gas equipment (Babcock) for SIDOR-IV expansion, Matanzas.
• Inspection services of 3 units gas compressors for Midrex plant supplied by Aerzener Maschinenfabrik, Germany.
• Inspection of various equipment for two ladle furnaces of 200 T capacity each supplied by Danieli, Italy and their various sub-suppliers in Italy and USA
• Inspection and expediting services for various equipment for oxygen plant supplied by B.O.C.P.P., U.K. and their various sub-suppliers located at various parts of U.K and Switzerland.

JGC Corporation-Kuwait National Petroleum Company, Kuwait

• Inspection of parts of oil tanks, pressure vessels, checking by NDT, piping, valves for petroleum refinery equipment for petroleum refinery modernisation project - Minaal-Ahmadi Refinery

Heavy Industrial Corporation of Malaysia BHD, Kuala Lumpur, Malaysia

• Inspection of plant and equipment supplies from Japan for Trengganu direct reduction plant

Perwaja Trengganu SDN BHD, Kemaman, Malaysia

• Inspection and off-site tests in Japan of equipment supplies for the direct reduction plant

HICOM, Malaysia

• Inspection of belt conveyors from jetty and other areas; stackers, front-end loaders, traveling hoppers; DR plant equipment, including shaft furnace, briquetting plant; EHV transformers, arc furnaces, calcining plant equipment; air separation plant equipment, EOT cranes, thyristor converters etc for PTSB Trengganu steel project, Malaysia.

Mannesmann Demag, Brandenburg, Germany

• Inspection and expediting and supervision of assembly services to Mannesmann Demag, Brandenburg for hot roller tables ordered by them on various sub-suppliers in Germany.

Bhutan Ferro Alloys Ltd, Bhutan

• Inspection services for expansion / diversification of ferro silicon plant at Pasakha
• Inspection services for expansion / diversification of ferro silicon plant at Pasakha, Bhutan

Hoogovens Technical Services, Iron and Steel BV, The Netherlands

• Inspection and monitoring services for coke oven door assembly at the premises of Simplex Castings Ltd, Bhilai, India. [Place of assignment : India]
• Monitoring of manufacturing progress and inspection of 76 nos. coke oven door at Simplex, Bhilai.

Otto Corporation, Tokyo, Japan

• Monitoring of manufacturing progress and inspection of coke oven doors assembly at factory of Simplex Castings Limited.
• Inspection of 284 nos. coke oven door body, 131 nos. door frame, 3 nos. sinter pallet, 24 sets of side wall for sinter pellet etc. before shipment, inspection of painting & inspection of packages at manufacturing works, monitoring of manufacturing progress, confirmation of shipment.
• Manufacturing work progress and inspection of complete assembly of 45 nos. door body and 120 nos. door frame.

Pohang Iron and Steel Co Ltd (Posco), Pohang, Korea

• Inspection services for various plant and equipment for vacuum degassing unit, sinter plant, oxygen compressor, corex C-2000 plant etc, hot rolling mill line, cold rolling mill procured from various suppliers in Europe for Pohang Steel Works, Posco. These services are being provided through INCOK.
• Inspection of LP hood at Larsen & Toubro’s Powai Works, Mumbai, India for Posco. These services were rendered through INCOK.

Arab Consulting Engineers, Giza, Egypt

• Inspection services for various plant and equipment. Formulation of inspection procedures, methodology of inspection services for various items of plant and equipment including 95-T EAF/LF items of the steel melt shop; 5-strand billet caster; PSA oxygen plant, heavy duty cranes, water treatment plant, electrics and automation facilities for Mini mill project, Suez Steel Company, Suez, Egypt (capacity: 600,000 tons/year).

British Inspecting Engineers Ltd, Cesterfield, England

• Third party inspection services at manufacturer’s works for Inspection/testing of longitudinal submerged arc welded oil line piping 23” ID x 60.4.86 mm long and 23” ID/609.20 mm long) complying with API SL ANSIB 16.25 for Rosetta Gasfield Development project of Rasbid Petroleum Company, Egypt. 1999

BIE International B.V., The Netherlands

• Inspection services for 970 M/T 24” SAW pipes at Kosi Kalam, Delhi

Suez Steel Project, Egypt

• Inspection of Electric Arc Furnace (EAF), Ladle Furnace (LF), auxiliary equipment for EAF & LF, scrap handling facilities, alloy and additive systems, oxygen plant, billet caster, cranes, transformers for EAF & LF, furnace operation switchgear, PLC system, weighing system etc required for a steel melt shop with auxiliary facilities for production of 600,000 tons/year of cast billets.
• Inspection services of equipment at vendor’s premises for Steelmaking shops and Auxiliary facilities

PT. South Pacific Viscose West Java, Indonesia

• Third party inspection services for cooling tower, model 597-9V-3 at Paharpur Cooling Towers Ltd, Kolkata.
• Third party inspection services for supporting roller assembly

Thyssen Krupp Robins Inc., Denver, USA

• Inspection services at manufacturer’s works IMC, Abu Dhabi, UAE for stacker-reclaimer for KRI-Qatar gas project. 2006

Al Nasser Industrial Enterprises, L.L.C, Abu Dhabi, UAE

• Inspection and vendor assessment services at the manufacturer’s works for the equipment manufactured in India for HYL micro module based DR plant & SMS project

Rajhi Steel Project, Jeddah, Saudi Arabia

• Supervision of structural welding at Jeddah site.